ECU MASTER BLUETOOTH MODULEThis module allows wireless communication between ECU Master and Android mobile phone. "APP on the EcuMaster Play Store"Thanks to the use of the BlueTooth module and the AIM communication protocol, it is possible to monitor the basic motor parameters in real time,such as A..
4 bar map sensor. The sensor is undoubtedly vital for proper mechanical tuning of a vehicle, especially while using the EcuMaster DET3/EMU for MAF->MAP conversion. Operation range: 0-400 kPa (from -1 to 3 bar of boost). Preferred operation temperature: from -40° to +125°C..
Universal wiring for easy installation with Ecu Master Black Edition.The kit consists of FLRY cables suitable for the automotive industry. An EMU connector is installed at the end of each cable.The total length is 2.5m, with 3 harnesses for a total installation of the ECU Black* this harness is only..
The CAN-Bus communication module is connected to the expansion port of the ECUMASTER EMU computer.The list of CAN protocols supported by EMU; BMW, Citroen, VW, Ford or Lotus (and many others).Additionally, it is possible to work with Dashboards that use the Motec M800 or Haltech E8 E11v2 protocol.Ex..
The EDL-1 data logger is a “must have” for any professionals using the EMU, EMU CLASSIC and the EMU BLACK device. Utilizing serial communication, this device is able to record over 200 data channels with a frequency of 25Hz.Use of the popular SDHC cards with FAT32 file system means reading data on P..
Harness incorporating 20 FLRY electric cables (used in the automotive industry) of the length of 30 cm, with terminals designed for the DET3 plugs. The product facilitates device installation, as well as decreases the risk of improper device connection, especially due to the fact that each of the ca..
Our goal is to provide the best possible products at an affordable price. We have improved the design of the EMU based on customer feedback and have kept the price at a similar level.The main improvements are as follows:-Improved ignition outputs that allow the use of more than one active coil on on..
Haldex Drag Racing Controller is an essential device for every competitor using car equipped with a Haldex 4Motion system in drag racing. All the top drivers ( racing audi or VW) of the eastern Europe drag racing are using this device. Our haldex controller provides possibility of complete engaging ..
EcuMaster EMU dedicated standalone computer mount. Made from CNC machined aluminum. Painted in black white or yellow using powder coating technique. Very lightweight, yet sturdy. Mounted in 4 points (screwed). Weight of the mount does not exceed 150g...
MAC solenoid utilized to exercise precise control over the boost level. MAC solenoid valves are used by the most prominent Electronic Boost Controller (EBC) producers, such as: HKS, Greddy, Apexi, AEM, etc. The said products may be properly connected to VEMS, Mega Squirt, Ecumaster EMU, and DET. The..