Search

ECU MASTER BLUETOOTH MODULEThis module allows wireless communication between ECU Master and Android mobile phone. "APP on the EcuMaster Play Store"Thanks to the use of the BlueTooth module and the AIM communication protocol, it is possible to monitor the basic motor parameters in real time,such as A..

The BOSCH LSU 4.2 broadband lambda sensor allows making precise measurements of the composition of the fuel-air mixture. It perfectly works with your ECUMASTER EMU, as well as commercially available AFR controllers/indicators. In our shop, you can also buy a complementary connector to the LSU 4..

This adapter allows you to change the original wiring of the car. It is held in the middle between the connectors of the Original ECU and those of EcuMaster.List of Supported Cars:ADAPTOR  PLUG & PLAY EMU 3SGTE (GEN2, GEN3)ADAPTOR  PLUG & PLAY EMU SUBARU MY96-MY98ADAPTOR  PLUG..

The DIGITAL ECU TUNER 3 is a very popular piggyback tuning device across Europe. The DET3 is probably the most capable piggyback tuning device for its size. The DET3 is incredibly versatile, user friendly and powerful.For most applications, the DET3 allows for the removal of an airflow meter, can dr..

We present the new ECUMASTER Racing Dash family of products.Our Specific goal was to create a fully customizable, feature-rich, quality solution for professional drivers. Based on their requirements and suggestions, we have designed and manufactured the perfect device to please every race drvier and..

We present the new ECUMASTER Racing Dash family of products.Our Specific goal was to create a fully customizable, feature-rich, quality solution for professional drivers. Based on their requirements and suggestions, we have designed and manufactured the perfect device to please every race drvier and..

"Programmable AEM Infinity 506 controller 30-7106"High performance 5 series engine control unit for up to 6 cyl. and 6fuel injector processors: 32 bit - 200 MHz - 400 MIPS200 MHz processor and real time operating systemThe Infinity family of control units is probably the fastest freely programmable ..

"AEM ​​Infinity 508-Programmable Controller 30-7108"Series 5 high-performance engine control unit for up to 8 cyl. and 8 fuel injectorprocessors:  32 bit - 200 MHz - 400 MIPS200MHz processor and real-time operating systemThe Infinity control unit family is probably the fastest freely programmab..

Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring l..

Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU comes in its own enclosure, while installation is a breeze with no alteration of the factory wiring loom re..

Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring l..

Easy to install. Affordable. Reliable. G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom re..

Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring l..

Easy to install. Affordable. Reliable.  G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring l..

The Black EMU is a class-leading, self-contained engine management system designed to handle the most advanced and complex engines available. It is a successor to our proven system, the EMU. Over the life of EMU we have collected a lot of data that allows us to substantially improve the hardware and..

The intake air temperature sensor (IAT) is perfectly suited to work with ECUMASTER EMU. The sensor has an M12x1.5 thread. In the ECUMASTER EMU configuration, select the BOSCH NTC M12-L 0280130039 as a sensor...

Decades ago, the critical electronic components in a race car were the ignition coil and points. Race cars now feature advanced engine management systems, antilock brake systems, paddle shifters, dataloggers, radios, electric pumps, fans, and lights. All components need to be controlled at the corre..

4 bar map sensor. The sensor is undoubtedly vital for proper mechanical tuning of a vehicle, especially while using the EcuMaster DET3/EMU for MAF->MAP conversion. Operation range: 0-400 kPa (from -1 to 3 bar of boost). Preferred operation temperature: from -40° to +125°C..

Universal wiring for easy installation with Ecu Master Black Edition.The kit consists of FLRY cables suitable for the automotive industry. An EMU connector is installed at the end of each cable.The total length is 2.5m, with 3 harnesses for a total installation of the ECU Black* this harness is only..

The CAN-Bus communication module is connected to the expansion port of the ECUMASTER EMU computer.The list of CAN protocols supported by EMU; BMW, Citroen, VW, Ford or Lotus (and many others).Additionally, it is possible to work with Dashboards that use the Motec M800 or Haltech E8 E11v2 protocol.Ex..

The EDL-1 data logger is a “must have” for any professionals using the EMU, EMU CLASSIC and the EMU BLACK device. Utilizing serial communication, this device is able to record over 200 data channels with a frequency of 25Hz.Use of the popular SDHC cards with FAT32 file system means reading data on P..

Harness incorporating 20 FLRY electric cables (used in the automotive industry) of the length of 30 cm, with terminals designed for the DET3 plugs. The product facilitates device installation, as well as decreases the risk of improper device connection, especially due to the fact that each of the ca..

Our goal is to provide the best possible products at an affordable price. We have improved the design of the EMU based on customer feedback and have kept the price at a similar level.The main improvements are as follows:-Improved ignition outputs that allow the use of more than one active coil on on..

Haldex Drag Racing Controller is an essential device for every competitor using car equipped with a Haldex 4Motion system in drag racing. All the top drivers ( racing audi or VW) of the eastern Europe drag racing are using this device. Our haldex controller provides possibility of complete engaging ..

EcuMaster EMU dedicated standalone computer mount. Made from CNC machined aluminum. Painted in black white or yellow using powder coating technique. Very lightweight, yet sturdy. Mounted in 4 points (screwed). Weight of the mount does not exceed 150g...

MAC solenoid utilized to exercise precise control over the boost level. MAC solenoid valves are used by the most prominent Electronic Boost Controller (EBC) producers, such as: HKS, Greddy, Apexi, AEM, etc. The said products may be properly connected to VEMS, Mega Squirt, Ecumaster EMU, and DET. The..

An exhaust gas temperature sensor (EGT, K-type thermocouple) that cooperates with the ECUMASTER EMU computer. Unlike Chinese sensors, the design of our sensor ensures a quick response to the changing temperature and high resistance to high temperature (INCONEL armour).The sensor diameter is 3 mm, th..

2.5 bar map sensor with the operation range between -1 and 1.5 bar. The sensor is exceptionally vital for proper mechanical tuning of a vehicle, especially while taking advantage of the EcuMaster device...

Carbon button holder plate for steering wheels. Thickness 2.5 mm...

Button plate on the steering wheel, made entirely of carbon, 2.5 mm thick, allows use up to 4 buttons (not supplied). The 6 holes drilling allows the fixing between the steering wheel and the hub (fixing screws supplied)...