Brake Oil Motul Motul RBF660 Dot 4 Brake-Clutch RBF660

For all types of hydraulic brake and clutch actuators requiring a non-silicone fluid.

Developed to withstand extreme temperatures generated in ceramic or carbon racing brakes, allowing

a flow of air for minor cooling.

It can also be used with conventional steel discs.

Exceeds the requirements of the DOT 3, DOT 4 and DOT 5.1 standards (with the exception of the viscosity at -40 ° C of the DOT 5.1)

PERFORMANCES

SPECIFICATIONS: FMVSS 116 DOT 4 / SAE J1703

Extreme resistance and thermal stability:

Very high boiling point (328 ° C), higher than conventional DOT 5.1 (260 ° C min.) And DOT 4 (230 ° C min.)

It allows effective braking even in extreme conditions of use.

It allows to obtain better aerodynamic performance by reducing the flow of air necessary for the cooling of the brakes

on the cars.

Efficient in the event of rain:

The very high boiling point (204 ° C), higher than the conventional non-silicon DOT 5.1 brake fluids (180 ° C

min.) and DOT 4 (155 ° C min.), allows an efficient braking level even in wet conditions.

The brake fluids tend to absorb moisture from the air, which reduces the boiling point and increases the risk of

"vapor-lock" phenomenon.

The humid boiling point is measured by humidifying the product with about 3% of water.

RECOMMENDATIONS

Do not mix with polyglycol based brake fluids.

Do not mix with silicone fluids (DOT 5 silicone base) or mineral fluids (LHM).

Keep the product in its original packaging, tightly closed, in order to avoid moisture absorption.

Aggressive chemical product, avoid contact with hands and paints.

In case of direct contact with the skin, rinse thoroughly with water.

Data Sheet